RM33 Blizzard Bubbler & Glass Filler

Waterworks RM33 Bubbler

General Features

• Model Options: Available with a bubbler tap only or with a bubbler tap and glass filler.
• Design: Freestanding robust bubbler with inbuilt chiller, designed for high-traffic areas.
• Materials: 100% rust-proof, UV-stabilized polyethylene cabinet.
• Colors: Modern granite look.
• Warranty: 12-month comprehensive warranty covering parts and labor.

Specifications

Chilled Water Capacity

• Capacity: 30 liters per hour
• Reservoir Volume: 1.9 liters
• Temperature Range: Delivers water at approximately 10°C

Cabinet

• Construction: One-piece, blow-molded polyethylene cabinet for durability and vandal resistance.
• Service Access: Front access panel secured with four concealed screws for easy maintenance and filter replacement.

Taps

• Design: NSF-approved durable polypropylene, self-closing design.
• Types: Bubbler tap only or bubbler tap with optional two-way glass filler.

Performance

• Chilled Water Delivery:
  • 32°C ambient temperature: 30 liters/hour
  • 27°C inlet temperature: 30 liters/hour

Refrigeration

• Refrigerant: Gas R134A
• Compressor: Hermetically sealed with automatic overload protector
• Condenser: Quietly operating, air-cooled static type

Electrical

• Certification: Complies with ARI Standard 1010 and 1020
• Power Supply: 240V, 50Hz single phase
• Power Cord: 1.5 meters with standard 3-pin plug
• Full Load Current: 1.2 amps

Dimensions & Weight

• Model RM33: 28kg
• Width: 42cm
• Depth: 42cm
• Height: 118cm

Optional Extras

• Filtration: Internal or external Waterworks filter to reduce sediment, chemicals, organic compounds, and impurities.
• Temporary Drain Kit: 1.5-meter temporary drain kit for temporary installations such as construction sites.

Installation Connections

• Water Inlet: Industry standard 1/2” female BSP threaded connection situated on the rear of the cooler.
• Drain Outlet: Integrated P-trap with industry standard 40mm connection situated on the rear of the cooler.
• Pressure Limiting Valve: A 350 kPa pressure limiting valve must be fitted upon installation to maintain warranty.