D5 Series Countertop Hot-Cold Water Cooler

Waterworks D5 Series Water cooler

General Features

• Model Options: Available in Cool & Cold or Hot & Cold configurations.
• Design: Available in bench-top or floor-standing models, connects directly to mains water supply.
• Materials: Lead-free waterways and high-density polypropylene cold tank.
• Colors: High gloss cloud white.
• Warranty: 36-month comprehensive warranty covering parts and labor.

Specifications

Cold Tank

• Capacity: 14.3 liters
• Material: High-density polypropylene, rustproof and easy to clean.
• Temperature Range: Approximately 4-10°C

Hot Tank (Hot & Cold Model Only)

• Capacity: 1.8 liters
• Material: Type 304 stainless steel
• Heater: 500-watt sheathed heater
• Temperature Range: Approximately 84-89°C
• Safety: Hot safety tap included

Cabinet

• Construction: Top and front panels are moulded UV-treated ABS; side panels are zinc-coated steel sheets covered in high polymer polyester resin.

Taps

• Design: NSF-approved durable polypropylene, self-closing lever type.
• Types: Fully recessed for added protection; optional hygienic push taps available.

Performance

• Cold Water Delivery:
  • 21°C: 6.6 liters/hour
  • 27°C: 4.8 liters/hour
  • 32°C: 2.7 liters/hour
• Hot Water Delivery: 44 x 150ml cups per hour (intermittent use only)

Refrigeration

• Refrigerant: Gas R134A
• Compressor: Hermetically sealed with automatic overload protector
• Condenser: Quietly operating, air-cooled static type

Electrical

• Certification: Certificate number 160793
• Power Supply: 220V, 50Hz single phase
• Power Cord: 1.5 meters
• Full Load Current: 1.2 amps

Dimensions & Weight

• Model D5C: 19kg
• Model D5CH: 21kg
• Width: 33cm
• Depth: 33cm
• Height: 115cm
• Model SD5C: 16kg
• Model SD5CH: 18kg
• Width: 33cm
• Depth: 33cm
• Height: 70cm

Optional Extras

• Filtration: Compatible with most inline filter systems.
• Non-Splash Valve: Allows standard bottles to be changed without excess spillage.

Installation Connections

• Water Inlet: Industry standard 1/2” female BSP threaded connection situated on the rear of the cooler.
• Drain Outlet: Integrated P-trap with industry standard 40mm connection situated on the rear of the cooler.
• Pressure Limiting Valve: A 350 kPa pressure limiting valve must be fitted upon installation to maintain warranty.